View TLP1033A_4124699.PDF datasheet online --- IC-ON-LINE

Datasheet File OCR Text:

TLP1032(F), TLP1033A(F)
TOSHIBA Photointerrupter Infrared LED + Photo IC
TLP1032(F), TLP1033A(F)
Lead(Pb)-Free Domestic electrical appliances such as VTRs and CD players Office equipment such as photocopiers, printers and fax machines Vending machines Position detectors
The TLP1032(F)/TLP1033A(F) is a high-withstanding-voltage photo-interrupter for digital output. The device combines a high-optical-output GaAs infrared LED with a high-sensitivity, high-gain Si photo-IC. The photo-IC, which supports a wide range of systems (3.3 V to 12 V), enables the device to consume less power than conventional devices. The device also features a narrow slit width and high resolution. The short lead package allows automatic mounting. * * * * * * Designed for direct mounting on printed circuit boards (positioning pins included) The short lead package allows automatic mounting: Lead length of 3.4 0.3 mm Permissible board thickness: 1.6 mm or less Gap: 5 mm Resolution: Slit width of 0.5 mm Digital output (open-collector) TLP1032(F) : Low-level output at shielding TLP1033A(F): High-level output at shielding * * * * * Direct connection to logic IC Power supply voltage: VCC = 2.7 V~15 V High-speed response Detector impermeable to visible light Package material: Polybutylene-terephthalate (UL94V-0, black)
TOSHIBA Weight: 0.6 g (typ.)
11-14G1
1
2007-10-01
TLP1032(F), TLP1033A(F)
Absolute Maximum Ratings (Ta = 25C)
Characteristic Forward current LED Forward current derating Reverse voltage Detector Supply voltage Output voltage Low-level output current (Ta = Topr) (Ta > 25C) (Ta > 85C) Symbol IF IF/C VR VCC VO IOL Topr Tstg (Note 1) Tsol Rating 50 -0.33 -2 5 15 15 16 -30~95 -40~100 260 Unit mA mA/C V V V mA C C C
Operating temperature Storage temperature Soldering temperature (5 s)
Note: Using continuously under heavy loads (e.g. the application of high temperature/current/voltage and the significant change in temperature, etc.) may cause this product to decrease in the reliability significantly even if the operating conditions (i.e. operating temperature/current/voltage, etc.) are within the absolute maximum ratings and the operating ranges. Please design the appropriate reliability upon reviewing the Toshiba Semiconductor Reliability Handbook ("Handling Precautions"/"Derating Concept and Methods") and individual reliability data (i.e. reliability test report and estimated failure rate, etc). Note 1: Soldering is performed 1.5 mm from the bottom of the package.
Operating Ranges
Characteristic LED forward current Supply voltage Output voltage Low-level output current Operating temperature Symbol IF VCC VO IOL Topr Min 8 (Note 2) 2.7 -25 Typ. 3.3 Max 20 13.2 13.2 16 95 Unit mA V V mA C
Note 2: The value 8 mA allows for a 50% optical fluctuation in the LED. The initial value of the threshold input current is 4 mA or less.
2
2007-10-01
TLP1032(F), TLP1033A(F)
(unless otherwise specified: Ta = -30~95C, VCC = 2.7~15 V)
Characteristic Forward voltage LED Reverse current Peak emission wavelength Operating supply voltage Low-level supply current Symbol VF IR P VCC ICCL Test Conditions IF = 10 mA, Ta = 25C VR = 5 V, Ta = 25C IF = 15 mA, Ta = 25C IF = *1, Ta = 25C IF = *1 IF = *2, Ta = 25C IF = *2 IOL = 16 mA, IF = *1 Ta = 25C IOL = 16 mA, IF = *1 High-level output current Peak sensitivity wavelength L H threshold input current IOH P IFLH IF = *2, VO = 15 V Ta = 25C Ta = 25C TLP1032(F) Min 1.00 2.7 Typ. 1.15 940 0.05 900 0.67 1.5 0.02 0.8 0.8 0.02 Max 1.30 10 15 1.6 2.0 1.1 1.2 0.3 0.4 6.3 3 4 3 4 9 15 15 9 0.5 3 3 0.5 s A nm mA Unit V A nm V mA
Electrical and Optical Characteristics
Detector
High-level supply current
ICCH
mA
Low-level output voltage
VOL
V
H L threshold input current Propagation characteristics
IFHL
Ta = 25C
TLP1033A(F) TLP1032(F) TLP1033A(F) TLP1032(F) TLP1033A(F) TLP1032(F)
mA
Hysteresis
IFHL/IFLH
Propagation delay time (L H)
tpLH
Propagation delay time (H L)
tpHL
Rise time
tr
VCC = 3.3 V IF = 15 mA RL = 10 k Ta = 25C
TLP1033A(F) TLP1032(F) TLP1033A(F) TLP1032(F) TLP1033A(F)
Fall time
tf
*1 *2
0 mA for the TLP1032(F); 15 mA for the TLP1033A(F). 15 mA for the TLP1032(F); 0 mA for the TLP1033A(F).
3
2007-10-01
TLP1032(F), TLP1033A(F)
Note 3: The switching time measurement circuit and waveform are as follows: TLP1032(F)
Constant-voltage circuit IF
Amp
VCC = 3.3 V 10 k RL VOUT
IF tpLH VOUT tr
50% tpHL 90% 10% tf VOH 1.5 V VOL
TLP1033A(F)
10 k
Constant-voltage circuit IF
Amp
VCC = 3.3 V RL VOUT
IF tpHL VOUT tf
50% tpLH 90% 10% tr VOH 1.5 V VOL
Markings
Monthly lot number
Month of manufacture (January to December denoted by the letters A to L respectively) Year of manufacture (the last digit of the year of manufacture)
Precautions
* When removing flux with chemicals after soldering, clean only the soldered part of the leads. Do not immerse the entire package in the cleaning solvent. Chemical residue on the LED emitter or the photodetector inside the photo-IC case may adversely affect the optical characteristics of the device and may drastically reduce the threshold input current. The case is made of polybutylene-terephthalate. Oil or chemicals may cause the package to melt or crack. Care should be taken regarding the environment in which the device is to be installed. Mount the device on a level surface. Output fluctuates for 100 s after power-on while the internal circuit stabilizes. To stabilize the power line, insert a bypass capacitor of up to 0.01 F between VCC and GND, close to the device. The threshold input current increases over time due to current flowing in the infrared LED. The design of circuits that are to incorporate the device must take into account the change in threshold input current over time. The change in threshold input current is equal to the reciprocal of the change in LED infrared optical output.
* * * * *
I FHL ( t ) PO ( t ) = I FHL (0) PO (0 ) *
-1
Choose a high-quality shutter material that is impermeable to light. If the material is of inferior quality, light from the LED may pass through the shutter, causing the device to malfunction.
4
2007-10-01
TLP1032(F), TLP1033A(F)
Package Dimensions: TOSHIBA 11-14G1
Unit: mm
Abbreviation P1032 1033A
Type TLP1032(F) TLP1033A(F)
( ): reference value
Weight: 0.6 g (typ.)
Pin Connections
TLP1032(F)
Constant-voltage circuit 3
TLP1033A(F)
Constant-voltage circuit 3
1
Amp
4 5
1
Amp
4 5
2
2
1: Anode 2: Cathode 3: VCC 4: OUT 5: GND
5
2007-10-01
TLP1032(F), TLP1033A(F)
IF - Ta
60 100 50
IF - V F
(typ.)
Permissible forward current IF (mA)
50
(mA) Forward current IF
30
40
30
10 5 3
20
10
Ta = 75C
50 25
0
-25
0 -20
0
20
40
60
80
100
1 0.8
0.9
1.0
1.1
1.2
1.3
1.4
Ambient temperature Ta (C)
Forward voltage VF
(V)
VOL - IOL
0.1 VCC = 3.3 V IF = 15 mA (TLP1033A(F)) (TLP1032(F))
(typ.)
10
tpLH, tpHL - IF
Propagation delay time tpLH, tpHL (s)
Ta = 25C VCC = 3.3 V 8 RL = 10 k
(typ.)
VOL (V)
Ta = 25C 0.05
0.03 IF = 0
Low-level output voltage
tpHL (TLP1032(F)) tpLH (TLP1033A(F)) 6
0.01
4
0.005 0.003 0.002 0.3 0.5 1 3 5 10 30
2
tpLH (TLP1032(F)) tpHL (TLP1033A(F))
0 0
10
20
30
40
50
60
Low-level output current
IOL (mA)
Forward current IF
(mA)
tr, tf - RL
20 10 Ta = 25C VCC = 3.3 V
(typ.)
9
tpLH, tpHL - RL
Propagation delay time tpLH, tpHL (s)
8 7 6 5 4 3 2 1 (TLP1033A(F)) 0 0.1 0.3 0.5 1 3 5 10 (TLP1033A(F)) Ta = 25C VCC = 3.3 V IF = 15 mA tpLH tpHL
(typ.)
Rise / Fall time tr, tf (s)
5 I = 15 mA F 3 1 0.5 0.3 0.1 0.05 0.03 0.01 0.1
tf (TLP1032(F)) tr (TLP1033A(F))
(TLP1032(F))
tr (TLP1032(F)) tf (TLP1033A(F))
(TLP1032(F))
0.3 0.5
1
3
5
10
30 50 100
300 500
30 50
100
Load resistance RL
(k)
Load resistance RL
(k)
6
2007-10-01
TLP1032(F), TLP1033A(F)
TLP1032(F)
1.2
Detection position characteristic (1)
TLP1032(F) (typ.)
1.2
Detection position characteristic (2)
(typ.)
1.0
1.0 Ta = 25C VCC = 3.3 V RL = 10 k IF = 20 mA - 0 d
Relative output voltage
0.8
Relative output voltage
0.8
Ta = 25C VCC = 3.3 V RL = 10 k IF = 20 mA Shutter
0.6
+
0.6
0.4 Shutter 0.2 Detection position d = 0 0.3 mm -0.2 0 0.2 0.4 0.6 0.8
0.4
d
0.2
Detection position d = 7.95 +1.25 mm -1.35
0 -0.4
0 7.0
7.2
7.4
7.6
7.8
8.0
8.2
Distance
d (mm)
Distance
d (mm)
TLP1033A(F)
1.2
Detection position characteristic (1)
TLP1033A(F) (typ.)
1.2
Detection position characteristic (2)
(typ.)
1.0
1.0 Ta = 25C VCC = 3.3 V RL = 10 k IF = 20 mA - 0 d
Relative output voltage
0.8
Relative output voltage
0.8
Ta = 25C VCC = 3.3 V RL = 10 k IF = 20 mA Shutter
0.6
+
0.6
0.4 Shutter 0.2 Detection position d = 0 0.3 mm -0.2 0 0.2 0.4 0.6 0.8
0.4
d
0.2
Detection position d = 7.95 +1.25 mm -1.35
0 -0.4
0 7.0
7.2
7.4
7.6
7.8
8.0
8.2
Distance
d (mm)
Distance
d (mm)
7
2007-10-01
TLP1032(F), TLP1033A(F)
Relative Positioning of Shutter and Device
For normal operation, position the shutter and the device as shown in the figure below. Take into account the detection direction characteristic and switching time of the device in determining the shutter slit width and pitch.
Shutter
A
A' Unit: mm
Center of sensor 9.2 min 6.6 max 7.95
Cross section between A and A'
8
2007-10-01
TLP1032(F), TLP1033A(F)
RESTRICTIONS ON PRODUCT USE
* The information contained herein is subject to change without notice.
20070701-EN
* TOSHIBA is continually working to improve the quality and reliability of its products. Nevertheless, semiconductor devices in general can malfunction or fail due to their inherent electrical sensitivity and vulnerability to physical stress. It is the responsibility of the buyer, when utilizing TOSHIBA products, to comply with the standards of safety in making a safe design for the entire system, and to avoid situations in which a malfunction or failure of such TOSHIBA products could cause loss of human life, bodily injury or damage to property. In developing your designs, please ensure that TOSHIBA products are used within specified operating ranges as set forth in the most recent TOSHIBA products specifications. Also, please keep in mind the precautions and conditions set forth in the "Handling Guide for Semiconductor Devices," or "TOSHIBA Semiconductor Reliability Handbook" etc. * The TOSHIBA products listed in this document are intended for usage in general electronics applications (computer, personal equipment, office equipment, measuring equipment, industrial robotics, domestic appliances, etc.).These TOSHIBA products are neither intended nor warranted for usage in equipment that requires extraordinarily high quality and/or reliability or a malfunction or failure of which may cause loss of human life or bodily injury ("Unintended Usage"). Unintended Usage include atomic energy control instruments, airplane or spaceship instruments, transportation instruments, traffic signal instruments, combustion control instruments, medical instruments, all types of safety devices, etc.. Unintended Usage of TOSHIBA products listed in his document shall be made at the customer's own risk. * The products described in this document shall not be used or embedded to any downstream products of which manufacture, use and/or sale are prohibited under any applicable laws and regulations. * The information contained herein is presented only as a guide for the applications of our products. No responsibility is assumed by TOSHIBA for any infringements of patents or other rights of the third parties which may result from its use. No license is granted by implication or otherwise under any patents or other rights of TOSHIBA or the third parties. * GaAs(Gallium Arsenide) is used in this product. The dust or vapor is harmful to the human body. Do not break, cut, crush or dissolve chemically. * Please contact your sales representative for product-by-product details in this document regarding RoHS compatibility. Please use these products in this document in compliance with all applicable laws and regulations that regulate the inclusion or use of controlled substances. Toshiba assumes no liability for damage or losses occurring as a result of noncompliance with applicable laws and regulations.
9
2007-10-01

▲Up To Search▲

Price & Availability of TLP1033A

	To Download TLP1033A Datasheet File
If you can't view the Datasheet, Please click here to try to view without PDF Reader .